First ensure that you have an internal test. This test can differ from one operation to another thus we do not provide one. However, here is a general template you can use:
Driver Qualification Road Test
Driver Qualification Road Test
Driver Information:
- Name: ________________________
- License Number: ________________
- Class: _________________________
- Endorsements: _________________
- Expiration Date: _______________
- Vehicle Type: ___________________
Pre-Trip Inspection
- Check general condition of the vehicle
- Inspect parking and service brakes
- Inspect steering mechanism
- Inspect tire condition
- Check all lights and reflectors
- Test horn and windshield wipers
- Adjust and check mirrors
- Check emergency equipment
Coupling and Uncoupling (if applicable)
- Verify fifth wheel jaws are open
- Properly align with trailer
- Connect brake and electrical lines
- Charge trailer brakes
- Back up slowly
- Verify proper coupling
- Lock fifth wheel handle
- Raise landing gear and remove wheel chocks
- Test trailer brakes
Placing Vehicle in Operation
- Use seat belt
- Start vehicle correctly
- Check air pressure in brake system
- Test brakes
- Check traffic conditions
Driving Skills
- Use both hands on the steering wheel
- Check mirrors frequently
- Accelerate, steer, and brake smoothly
- Shift gears properly
- Use directional signals correctly
- Maintain appropriate speed for conditions
- Stop vehicle at proper locations
- Avoid vehicle roll when stopped
- Prepare to stop at intersections even with green light
- Signal turns well in advance
- Approach turns at proper speed
- Ensure vehicle is in the correct lane for turns
- Check traffic conditions before turning
- Keep vehicle in the proper lane during turns
- Do not shift gears during turns
Parking and Miscellaneous
- Stop in correct position when parking
- Get out and check the area before backing
- Avoid backing from the blind side
- Pass safely and legally, checking ahead and behind
- Signal intentions to pass
- Leave sufficient space when returning to the lane
- Check all directions at railroad crossings
- Stop at railroad crossings if required
Once you decide on your test, you can easily pull a certification from our software by heading over to the driver profile and on the form menu selecting "Road test certificate":
Once you selected it a certificate will formulate. Now, ensure the tester signs and dates. Make a copy if needed, scan and save on the driver's profile.
We hope this short guide has provided some guidance in how to pull a road test certificate. If you have further questions, do not hesitate to send us an email to support@driverseo.com.